السيناريو
A Raspberry Pi drives a dual-color LED with common anode from two GPIO pins, using low-side switching through current-limiting resistors.
ما الذي يتضمنه هذا الرسم
اقرأ القرارات الكامنة وراءه.
01
Use common-anode LED with both anodes tied to the 3.3V rail
02
Connect each cathode to a GPIO pin through a 330 Ω resistor to set LED current
03
Tie Raspberry Pi ground to the 3.3V supply return
Reuse for any 3.3V microcontroller driving common-anode LEDs where GPIO sinks current to turn each color on.