Office Floor Evacuation Plan

An office evacuation plan shows occupants where they are, which routes lead to final exits, and where to gather outside. This example separates the open office from the lobby and two stairs so the route is easy to follow at a glance. It includes standard safety markers for a fire extinguisher and manual call point. Use measured room sizes and actual door positions when adapting it to a real building. Check routes on site and have the final sign reviewed against the building's emergency procedures and local requirements before posting it. Keep the posted drawing current whenever the layout, equipment, or approved route changes.

Tipo Plano de evacuaciónNorma ISO 23601:2020Motor schematex-evacuationActualizado 24/9/2026

La solicitud

“Draw an ISO office evacuation plan with an open office, lift lobby, west and east stairs, two marked exit routes, an extinguisher, call point, and assembly point.”

Entonces pruebaAdd a first-aid point.Move the YOU ARE HERE marker.

Qué hay en este dibujo

Lee las decisiones que hay detrás.

01Egress

Provide routes to two final exits.

02Markers

Show the posted location and fire equipment.

03Destination

Identify the external assembly point.

Use for a single office floor after confirming the layout and local posting requirements.

Explorar todas las plantillas de plano de evacuación →

Preguntas frecuentes

Preguntas habituales

Why show two exits?

Two marked routes help occupants identify an alternative route if one exit is blocked.

What does YOU ARE HERE mean?

It marks the location from which the posted plan is meant to be read.

Should the assembly point be shown?

Show it when the building emergency procedure identifies a designated outdoor gathering location.