Intermittent Stiffener Weld Callout

Intermittent stiffener weld callout

Intermittent fillet welds use separated weld segments rather than one continuous bead. The length value gives each segment, while pitch gives the repeat spacing. Placing the same notation on both sides of the reference line communicates matching welds on the two sides of a web stiffener. The callout is useful when the fabrication specification requires a controlled weld pattern. Before using the layout in a build or document, compare every label with the source requirements and update the drawing when parts, conditions, or materials change. The example is deliberately small so the essential relationships remain readable, easy to review with collaborators, and ready to extend with the details required for the actual project.

Tipo SoldaduraNorma AWS A2.4:2020 · ISO 2553:2019Motor schematex-weldingActualizado 24/9/2026

La solicitud

“Draw a welding symbol for 5 mm intermittent fillet welds on both sides of a web stiffener, 40 mm long at 120 mm pitch, using FCAW.”

Entonces pruebaChange the pitch to 150 mm.Make the arrow-side weld continuous.

Qué hay en este dibujo

Lee las decisiones que hay detrás.

01Both sides

Each side of the stiffener is welded.

02Intermittent pattern

Length and pitch limit the weld runs.

03Process

The tail names FCAW.

Use for structural stiffeners where intermittent welds are specified.

Explorar todas las plantillas de soldadura →

Preguntas frecuentes

Preguntas habituales

What is an intermittent weld?

It is a series of separated weld segments along a joint.

What is pitch?

Pitch is the center-to-center distance between intermittent weld segments.

Why show both sides?

It specifies a weld on each side of the joint.