依頼内容
“A 12 V thermostat: a 10k NTC thermistor in a divider feeds an op-amp comparator with a 100k hysteresis resistor. The output drives an NPN transistor that switches a relay, with a flyback diode across the coil.”
次はこちらLabel the op-amp as an LM358Add an LED that lights when the relay is on
この図に含まれるもの
図の背後にある意思決定を読み解く。
01
Used a Wheatstone bridge arrangement with NTC and fixed resistors to create a temperature-dependent voltage.
02
Added hysteresis via positive feedback from op-amp output to non-inverting input to prevent relay chattering.
This circuit is suitable for basic on-off temperature control in incubators, heating pads, and environmental chambers.