요청 내용
“Draw a 12 V car battery overcharge alert with a fuse, reverse-polarity diode, zener threshold, transistor, buzzer, red overcharge LED and green power LED.”
그렇다면Change the overcharge threshold to 14 V.Add a relay output for an external alarm.
이 도면에 담긴 내용
그 이면의 의사결정을 읽어 보세요.
01
Use a series reverse-polarity diode and fuse for input protection
02
Set threshold with a 13V zener and base resistor
03
Drive buzzer and red LED with NPN transistor; green LED shows normal power
Reuse for low-side switched alarms where a battery or DC voltage should trigger audible and visual warning above a set threshold.