요청 내용
“A Raspberry Pi GPIO18 3.3 V output driving LED1 through a 330 Ω series resistor to ground.”
그렇다면Change the resistor to 220 Ω.Add a second LED branch.
이 도면에 담긴 내용
그 이면의 의사결정을 읽어 보세요.
01
Use 330Ω series resistor for ~3mA LED current from 3.3V GPIO
02
Connect LED cathode to common ground (0V)
03
Model GPIO as a 3.3V DC supply with output net
Reuse for any single-LED status indicator on Raspberry Pi or similar 3.3V logic outputs where current must be limited to safe levels.