상황
A remote e-bike fleet uses a 2 kW PV array to charge a 48 V 200 Ah LiFePO4 battery, which then powers four 750 W hub motors on a common 48 V DC bus.
이 도면에 담긴 내용
그 이면의 의사결정을 읽어 보세요.
01
MPPT charge controller regulates the solar input to charge the battery safely
02
Battery isolator and fuses protect the DC bus and allow maintenance shutdown
03
Four hub motors are wired in parallel on the 48 V bus, each drawing up to 750 W
Use this netlist pattern for off-grid solar charging stations powering multiple DC loads, where a single battery bank and common ground simplify wiring and protection.