V-Groove Butt Joint Callout

V-groove butt joint callout

A V-groove callout communicates the preparation needed for a butt joint. The included angle and root opening describe the groove before welding. A backing symbol records that support is used behind the root, and the contour and finish state how the completed face is treated. This example gives a fabricator the essential information for a prepared plate splice without relying on a separate written note. Before using the layout in a build or document, compare every label with the source requirements and update the drawing when parts, conditions, or materials change. The example is deliberately small so the essential relationships remain readable, easy to review with collaborators, and ready to extend with the details required for the actual project.

유형 용접표준 AWS A2.4:2020 · ISO 2553:2019엔진 schematex-welding업데이트됨 2026. 9. 24.

요청 내용

“Draw a welding symbol for a plate butt joint with an arrow-side 60 degree V-groove, 3 mm root opening, 10 mm throat, backing, flush ground finish, and SMAW E7018 process note.”

그렇다면Change the root opening to 4 mm.Add a field-weld flag.

이 도면에 담긴 내용

그 이면의 의사결정을 읽어 보세요.

01Groove form

A V-groove prepares both plate edges.

02Root opening

The symbol fixes the 3 mm gap.

03Finish

Flush grinding is called out with G.

Use for full-penetration-style plate splice specifications where the joint preparation matters.

모든 용접 템플릿 보기 →

자주 묻는 질문

What is a V-groove weld?

It is a groove weld made after beveling both edges of a butt joint.

What does root opening mean?

It is the gap left between the prepared members at the root.

What does G mean?

G denotes a grinding finish.