O cenário
A 24V DC supply feeds a fused control circuit where a switch energizes a relay coil; the relay contact then switches a hydraulic solenoid valve, while flyback diodes across both coils suppress inductive voltage spikes.
O que há neste desenho
Entenda as decisões por trás dele.
01
Use a normally-open relay contact to isolate the low-power control switch from the high-current solenoid valve.
02
Place flyback diodes reverse-biased across the relay coil and the solenoid valve to protect against back EMF.
03
Fuse the 24V supply upstream of both the control and load branches.
When a PLC output or manual switch must control a 24V DC hydraulic directional valve without exposing the control circuit to inductive kickback.