A solicitação
“Draw a 9 V 2N5457 piezo preamp with gate bias, source resistor and bypass capacitor, drain resistor, input and output coupling capacitors, a 100 kΩ volume potentiometer, and a 10 kΩ tone potentiometer.”
Depois, tenteChange the input capacitor to 22 nF.Change the volume potentiometer to 250 kΩ.
O que há neste desenho
Entenda as decisões por trás dele.
01
JFET common source stage for high input impedance and gain
02
Passive volume control using a voltage divider
03
Passive tone control with RC low-pass filter
When building a preamp for piezo pickups that require high input impedance (1MΩ) and variable output level.