Warehouse Emergency Egress Map

A warehouse emergency egress map must make long travel routes readable from a posted sign. This plan starts on the warehouse floor, reaches a protected cross-aisle, and then leads to west or east final exits. The not-an-exit marker helps prevent a common source of confusion in large spaces. Fire extinguishers and the outdoor assembly point are also identified. Adapt room dimensions, aisles, and exits to the actual facility, and avoid treating the map as a substitute for a site survey. The responsible safety team should verify that routes remain usable and comply with the applicable requirements. Keep the posted drawing current whenever the layout, equipment, or approved route changes.

Tipo Plano de evacuaçãoNorma ISO 23601:2020Mecanismo schematex-evacuationAtualizado 24/09/2026

A solicitação

“Draw an NFPA warehouse emergency egress map with a warehouse floor, protected cross-aisle, west and east exit lobbies, two routes, extinguishers, a not-an-exit door, and an assembly point.”

Depois, tenteAdd a first-aid point.Move the assembly point.

O que há neste desenho

Entenda as decisões por trás dele.

01Routes

Use the protected cross-aisle for both exits.

02Warnings

Mark a service door that is not an exit.

03Equipment

Identify nearby extinguishers.

Use for a warehouse zone after confirming aisles, doors, and safe destinations on site.

Ver todos os modelos de plano de evacuação →

Perguntas frequentes

Dúvidas comuns

Why mark a not-an-exit door?

It helps keep an ordinary service door from being mistaken for an emergency exit.

What is a cross-aisle?

It is a main warehouse passage that connects storage areas to exit routes.

Should routes be checked on site?

Yes. Confirm the doors, travel paths, and assembly point before posting the map.