Fillet Weld Callout | ChatDiagram

Fillet weld callout

A fillet weld callout identifies the weld placed in the corner between two members. The arrow side tells the welder which side of the joint receives the weld, while the size gives the specified leg dimension. Add the process and filler information in the tail when it belongs on the drawing. This compact callout is useful on fabrication drawings where a gusset joins a column or beam. Before using the layout in a build or document, compare every label with the source requirements and update the drawing when parts, conditions, or materials change. The example is deliberately small so the essential relationships remain readable, easy to review with collaborators, and ready to extend with the details required for the actual project.

Tipo SoldagemNorma AWS A2.4:2020 · ISO 2553:2019Mecanismo schematex-weldingAtualizado 24/09/2026

A solicitação

“Draw a welding symbol for a 6 mm arrow-side fillet weld joining a gusset to a column, using GMAW with ER70S-6 wire.”

Depois, tenteAdd a 50 mm intermittent length with 150 mm pitch.Make it a field weld.

O que há neste desenho

Entenda as decisões por trás dele.

01Weld type

A fillet weld suits a lap or T joint.

02Leg size

The symbol specifies a 6 mm leg.

03Process note

The tail identifies GMAW and filler wire.

Use for a simple structural gusset connection.

Ver todos os modelos de soldagem →

Perguntas frequentes

Dúvidas comuns

What does the fillet symbol specify?

It specifies a weld in the corner of a joint and can include its leg size.

What is the arrow side?

It is the side of the joint indicated by the arrow on the welding symbol.

Can a process be included?

Yes. Put the process or filler note in the tail.