情境
You need a stable high-voltage bias for an avalanche photodiode in a light detection system. The circuit must limit current, filter noise, and provide a sense point for photocurrent monitoring.
這張圖裡有什麼
看懂背後的決策。
01
Use a 200V source with a 100k current-limiting resistor to protect the APD from overcurrent
02
Add a 1k sense resistor from anode to ground to convert photocurrent to a measurable voltage
03
Place a 10n capacitor across the APD to shunt high-frequency noise
Reusable for any reverse-biased APD application, including LIDAR receivers, photon counting, and optical communication front-ends.