情境
A battery-powered Arduino Nano project needs a soft latching power switch to conserve power and avoid the need for a mechanical switch.
這張圖裡有什麼
看懂背後的決策。
01
Using a MAX16054 IC for debounced push-button on/off control.
02
Using a P-channel MOSFET as a high-side switch to minimize voltage drop.
03
Adding a pull-up resistor to keep the MOSFET off when the controller output is high-impedance.
When designing battery-operated devices that need a low-power standby state and a simple user interface with a single button.