Bathroom DWV Plumbing Diagram

This simplified DWV schematic shows how a bathroom's lavatory, shower, and toilet waste branches join a common building drain. A cleanout provides an access point on the branch, and a vent connection is shown from the lavatory side toward the roof. The pipe labels distinguish smaller fixture branches from the larger toilet and building drain. Drain, waste, and vent systems protect trap seals and carry wastewater to the sewer or septic connection, but their exact arrangement must meet local plumbing code. This drawing is useful for discussing system logic during a remodel. It is not a permit-ready layout: actual fitting types, vent distances, slopes, fixture units, and routing need to be designed for the building and jurisdiction.

類型 P&ID標準 ANSI/ISA-5.1-2009 + ISO 10628-1:2014引擎 schematex-pid更新時間 2026/9/24

需求

“A simplified bathroom DWV plumbing diagram with a lavatory trap, shower trap, toilet, cleanout, branch drains, a vent to roof, and a building drain to the sewer.”

接著試試Add a tub drain branchLabel the required drain slope

這張圖裡有什麼

看懂背後的決策。

01Fixture waste

Separate lavatory, shower, and toilet branches.

02Access

Put a cleanout on the common branch.

03Vent

Show the vent connection and its route toward the roof.

04Outlet

Label the building drain leaving toward the sewer.

Use this as a conceptual DWV schematic and verify sizes, slope, venting, and fittings against local code.

瀏覽所有 P&ID 範本 →

常見問題

What does DWV mean?

It stands for drain, waste, and vent plumbing.

Why include a cleanout?

It provides access for inspection or clearing a drain blockage.

Is this a construction drawing?

It is a conceptual schematic; local code and project details determine the final design.