Die Anfrage
“Create a hydraulic-cylinder test-bench flowchart: receive and visually inspect a cylinder, reject failures, install passing cylinders, perform pressure, leak, and stroke tests, repair or adjust failed tests and repeat them, then give final approval when every specification is met.”
Dann probieren SieAdd a temperature test before final approval.Change the leak test to record the measured leak rate.
Was diese Zeichnung zeigt
Die dahinterstehenden Entscheidungen verstehen.
01
Visual inspection pass/fail
02
Pressure within specification
03
Leak rate acceptable
04
Stroke meets specification
When establishing a standardized testing procedure for hydraulic cylinders in a repair or manufacturing setting.