La solicitud
“Create a hydraulic-cylinder test-bench flowchart: receive and visually inspect a cylinder, reject failures, install passing cylinders, perform pressure, leak, and stroke tests, repair or adjust failed tests and repeat them, then give final approval when every specification is met.”
Entonces pruebaAdd a temperature test before final approval.Change the leak test to record the measured leak rate.
Qué hay en este dibujo
Lee las decisiones que hay detrás.
01
Visual inspection pass/fail
02
Pressure within specification
03
Leak rate acceptable
04
Stroke meets specification
When establishing a standardized testing procedure for hydraulic cylinders in a repair or manufacturing setting.