RLC Notch Filter Circuit

RLC Notch Filter

An RLC notch filter rejects a narrow band by providing a low-impedance shunt path at its tuned frequency. In this example, the inductor and capacitor are in series from the signal node to ground. At their resonant frequency the branch draws signal away from the output load; above and below that point its impedance rises. The input resistor limits loading and helps define the depth and width of the notch. This is a useful diagram for explaining unwanted tone suppression and interference rejection. Real notch depth depends on component Q, tolerances, source impedance, and load impedance, so prototype or simulate a design before relying on the ideal response.

Tipo Diagrama de circuitosNorma IEEE Std 315 / ANSI Y32.2Motor schematex-circuitActualizado 24/9/2026

La solicitud

“Draw an RLC notch filter with a 1 V AC input, 1 kΩ series resistor, a 10 mH and 100 nF series shunt branch, a 50 Ω loss resistor, and a 10 kΩ output load.”

Entonces pruebaChange the tank capacitor to 47 nF.Add a test point at the output.

Qué hay en este dibujo

Lee las decisiones que hay detrás.

01Notch branch

Put a series L-C path from signal to ground.

02Isolation

Use a series resistor ahead of the output.

03Load

Include the next-stage input resistance.

Use to illustrate a tuned branch that attenuates one narrow frequency region.

Explorar todas las plantillas de diagrama de circuitos →

Preguntas frecuentes

Preguntas habituales

What does a notch filter remove?

It attenuates a selected narrow frequency band while passing frequencies on either side.

Why is the L-C branch in series?

A series L-C branch has low impedance at resonance and can shunt that frequency to ground.

What limits notch depth?

Component losses, source resistance, and load impedance keep a practical notch from being ideal.