RLC Notch Filter Circuit

RLC Notch Filter

An RLC notch filter rejects a narrow band by providing a low-impedance shunt path at its tuned frequency. In this example, the inductor and capacitor are in series from the signal node to ground. At their resonant frequency the branch draws signal away from the output load; above and below that point its impedance rises. The input resistor limits loading and helps define the depth and width of the notch. This is a useful diagram for explaining unwanted tone suppression and interference rejection. Real notch depth depends on component Q, tolerances, source impedance, and load impedance, so prototype or simulate a design before relying on the ideal response.

種類 回路図規格 IEEE Std 315 / ANSI Y32.2エンジン schematex-circuit更新日 2026/9/24

依頼内容

“Draw an RLC notch filter with a 1 V AC input, 1 kΩ series resistor, a 10 mH and 100 nF series shunt branch, a 50 Ω loss resistor, and a 10 kΩ output load.”

次はこちらChange the tank capacitor to 47 nF.Add a test point at the output.

この図に含まれるもの

図の背後にある意思決定を読み解く。

01Notch branch

Put a series L-C path from signal to ground.

02Isolation

Use a series resistor ahead of the output.

03Load

Include the next-stage input resistance.

Use to illustrate a tuned branch that attenuates one narrow frequency region.

回路図のテンプレートをすべて見る →

よくある質問

What does a notch filter remove?

It attenuates a selected narrow frequency band while passing frequencies on either side.

Why is the L-C branch in series?

A series L-C branch has low impedance at resonance and can shunt that frequency to ground.

What limits notch depth?

Component losses, source resistance, and load impedance keep a practical notch from being ideal.