Clinic Evacuation Plan

Clinic Dual-Exit Evacuation Plan

A clinic evacuation plan should be especially clear for visitors who may not know the building. This example shows a patient area connected to a corridor with exits at both ends. The marked primary and secondary routes help staff direct people if one direction is unsafe. It includes a fire extinguisher, call point, and first-aid marker as orientation points. Use the actual names, doors, and equipment locations for the clinic. Confirm the plan with the facility emergency procedure and any accessibility needs before it is printed or posted. Keep the posted drawing current whenever the layout, equipment, or approved route changes.

Tipo Plano de evacuaciónNorma ISO 23601:2020Motor schematex-evacuationActualizado 24/9/2026

La solicitud

“Draw an ISO clinic evacuation plan with a patient area, clinic corridor, west and east exits, two routes, an extinguisher, first-aid point, and call point.”

Entonces pruebaAdd an AED marker.Change the patient area label.

Qué hay en este dibujo

Lee las decisiones que hay detrás.

01Routes

Lead the patient area to two exits.

02Markers

Identify the posted location and fire equipment.

03Care

Mark the first-aid point without confusing it with an exit.

Use for a small clinic area after verifying routes suitable for all occupants.

Explorar todas las plantillas de plano de evacuación →

Preguntas frecuentes

Preguntas habituales

Why include first aid on an escape plan?

It can help staff locate the designated first-aid point, but it should not distract from exit routes.

Can patient areas have two routes?

Show two routes when the layout and approved egress arrangement provide them.

Who should verify a clinic plan?

The facility safety lead should check it against the real layout and emergency procedure.