Clinic Evacuation Plan

Clinic Dual-Exit Evacuation Plan

A clinic evacuation plan should be especially clear for visitors who may not know the building. This example shows a patient area connected to a corridor with exits at both ends. The marked primary and secondary routes help staff direct people if one direction is unsafe. It includes a fire extinguisher, call point, and first-aid marker as orientation points. Use the actual names, doors, and equipment locations for the clinic. Confirm the plan with the facility emergency procedure and any accessibility needs before it is printed or posted. Keep the posted drawing current whenever the layout, equipment, or approved route changes.

類型 疏散計畫標準 ISO 23601:2020引擎 schematex-evacuation更新時間 2026/9/24

需求

“Draw an ISO clinic evacuation plan with a patient area, clinic corridor, west and east exits, two routes, an extinguisher, first-aid point, and call point.”

接著試試Add an AED marker.Change the patient area label.

這張圖裡有什麼

看懂背後的決策。

01Routes

Lead the patient area to two exits.

02Markers

Identify the posted location and fire equipment.

03Care

Mark the first-aid point without confusing it with an exit.

Use for a small clinic area after verifying routes suitable for all occupants.

瀏覽所有疏散計畫範本 →

常見問題

Why include first aid on an escape plan?

It can help staff locate the designated first-aid point, but it should not distract from exit routes.

Can patient areas have two routes?

Show two routes when the layout and approved egress arrangement provide them.

Who should verify a clinic plan?

The facility safety lead should check it against the real layout and emergency procedure.