シナリオ
A water treatment PLC uses NPN sinking transistor outputs to energize relay coils, and each relay's NO contact sources +24V PNP to a pump starter input.
この図に含まれるもの
図の背後にある意思決定を読み解く。
01
Use a dedicated 24V_ctrl rail for relay coils and a separate 24V_pnp rail for PNP contact outputs to preserve isolation.
02
Add flyback diodes across each relay coil to protect the NPN PLC output transistors.
03
Assign a 10k load resistor on each pump starter input so the PNP output net has a defined return path.
Reuse this pattern when interfacing sinking NPN PLC outputs to sourcing PNP field devices through relay isolation in industrial panels.