상황
A water treatment PLC uses NPN sinking transistor outputs to energize relay coils, and each relay's NO contact sources +24V PNP to a pump starter input.
이 도면에 담긴 내용
그 이면의 의사결정을 읽어 보세요.
01
Use a dedicated 24V_ctrl rail for relay coils and a separate 24V_pnp rail for PNP contact outputs to preserve isolation.
02
Add flyback diodes across each relay coil to protect the NPN PLC output transistors.
03
Assign a 10k load resistor on each pump starter input so the PNP output net has a defined return path.
Reuse this pattern when interfacing sinking NPN PLC outputs to sourcing PNP field devices through relay isolation in industrial panels.