CIP Cleaning Cycle SFC

CIP cleaning cycle SFC

A clean-in-place sequence is naturally expressed as an SFC because only one phase is active at a time. This example moves from idle through pre-rinse, timed caustic wash, and final rinse before issuing a completion pulse. Each transition names the signal that confirms the prior phase. It provides a compact design-review view of a cleaning cycle, while the actual recipe must still define temperatures, concentrations, flow, and validation requirements. Before using the layout in a build or document, compare every label with the source requirements and update the drawing when parts, conditions, or materials change. The example is deliberately small so the essential relationships remain readable, easy to review with collaborators, and ready to extend with the details required for the actual project.

유형 순차 기능 차트표준 IEC 61131-3:2013 §6.5엔진 schematex-sfc업데이트됨 2026. 9. 24.

요청 내용

“Create an SFC for a CIP cleaning cycle with idle, pre-rinse, a 20-minute caustic wash, final rinse, and complete steps, advancing on the corresponding completion signals.”

그렇다면Add a sanitize step after the final rinse.Change the caustic circulation time to 30 minutes.

이 도면에 담긴 내용

그 이면의 의사결정을 읽어 보세요.

01Phases

Rinse, wash, and final rinse are separate active states.

02Timed action

Caustic circulation has a 20-minute delay qualifier.

03Completion

Each phase waits for its defined feedback.

Use as a high-level sequence; validated recipes and safety conditions remain site specific.

모든 순차 기능 차트 템플릿 보기 →

자주 묻는 질문

What is CIP?

Clean-in-place is a controlled cleaning process for equipment without disassembly.

Why use a timed action?

It records that the wash action must remain active for a set time.

What returns the chart to idle?

The complete step transitions back to idle after its completion action.