A solicitação
“Draw a brewery mashing and lautering P&ID with a hot liquor tank, mash tun, lauter tun, transfer pump, mash-water and sparge-water control valves, and two temperature loops.”
Depois, tenteAdd a wort grant after the lauter tun.Change the mash transfer line to 6 inches.
O que há neste desenho
Entenda as decisões por trás dele.
01
Represent mash and lauter vessels as atmospheric tanks with bottom outlets and top inlets
02
Use branch from hot liquor tank to two control valves for mash and sparge temperature loops
03
Model controllers as shared control room instruments with electric transmitter signals and pneumatic valve actuation
Reuse for brewery hot-side P&IDs requiring temperature control on water addition to mash or lauter vessels.