Pump Discharge Flow Control Loop
This instrument loop diagram shows a basic pump discharge flow-control arrangement. Water leaves the feed tank through a centrifugal pump and passes through the controlled discharge line. FT-101 measures the flow immediately downstream of the pump and sends an electric signal to FIC-101. The flow indicating controller compares that measurement to its setpoint and sends a pneumatic output to FV-101. Moving the valve changes the downstream resistance and therefore the flow delivered to the process. The valve is labelled fail closed, which stops flow if the actuator loses air. This compact loop is useful for instrument design review, commissioning, and technician training. Add alarms, bypasses, minimum-flow protection, and detailed line data when the process requires them.
Open it in the AI editor with a prompt pre-filled — keep what works, change what doesn't.
Scenario
A process line needs to hold a pump discharge flow at a controller setpoint.
Key decisions
- Measurement: FT-101 reads the pump discharge line.
- Control: FIC-101 compares flow with its setpoint.
- Final element: FV-101 throttles the outlet flow.
- Fail state: The diaphragm valve closes on loss of actuator air.
When to reuse this
Use this pattern for a simple liquid-flow loop downstream of a centrifugal pump.
Frequently asked questions
What does FT-101 measure?
What does FIC-101 control?
Why is FV-101 fail closed?
More flow control examples
Try the diagram makers.
Tweak it with chat, export PNG/SVG, or fork it for your own use case.