D Flip-Flop with Clear and Preset

A D flip-flop with clear and preset provides ordinary clocked storage plus direct state control. The D input is sampled at the clock edge, while the active-low clear and preset inputs can force Q low or high independently of the clock. These asynchronous controls are commonly used to establish a known state during reset, although they must be used according to the device timing rules. The diagram keeps the data, clock and control pins explicit so a reader can distinguish normal operation from initialization. It is useful for teaching, digital design notes and small control circuits.

種類 回路図規格 IEEE Std 315 / ANSI Y32.2エンジン schematex-circuit更新日 2026/9/24

依頼内容

“Draw a 5 V 74HC74 D flip-flop with D, clock, active-low clear and preset inputs, plus Q and Q-bar outputs with 10 kΩ loads to ground.”

次はこちらTie the preset input high.Add a reset push button.

この図に含まれるもの

図の背後にある意思決定を読み解く。

01Clear input

Clear forces the stored state low.

02Preset input

Preset forces the stored state high.

03Separate controls

Both asynchronous controls are drawn independently.

Use this for logic that must initialize or override state without waiting for a clock.

回路図のテンプレートをすべて見る →

よくある質問

What is asynchronous clear?

It forces the output to a defined state without waiting for a clock edge.

Can preset and clear be asserted together?

That condition is device-specific and is generally avoided unless the datasheet defines it.

Why are the control pins active low?

Many logic families use active-low asynchronous controls, indicated by the bar in the signal name.