ChatDiagram
Try for free
6 templates · Single-line diagram

Electrical Systems Single Line Diagram Examples

Single-line diagrams (SLDs) show the electrical power system in simplified form — generators, transformers, buses, and protection devices represented as single-line paths rather than three-phase conductors.

Standard IEEE Std 315 + ANSI device numberingEngine schematex-sldExport SVG · PNG · PDF
6 templates
Single-line diagram Electrical Systems
Generator + ATS backup power — Single Line DiagramGenerator + ATS backup power — Single Line DiagramElectrical SystemsUse template →Data center 2N UPS single-line — Single Line DiagramData center 2N UPS single-line — Single Line DiagramElectrical SystemsUse template →Commercial solar PV interconnection — Single Line DiagramCommercial solar PV interconnection — Single Line DiagramElectrical SystemsUse template →13.8 kV utility substation — Single Line Diagram13.8 kV utility substation — Single Line DiagramElectrical SystemsUse template →Residential CGMP — Spanish REBT vivienda — Single Line DiagramResidential CGMP — Spanish REBT vivienda — Single Line DiagramElectrical SystemsUse template →Residential consumer unit — generic IEC 60364 — Single Line DiagramResidential consumer unit — generic IEC 60364 — Single Line DiagramElectrical SystemsUse template →

Nothing close enough? Start from a blank single‑line diagram → Describe it in one paragraph.

How to

How to use a single‑line diagram template.

  1. 01Start with the source

    Name the power source (utility, generator) and voltage level — the AI places it at the top.

  2. 02Add buses and transformers

    Describe each bus (collector node) and transformer, including voltage ratios (11kV/0.4kV).

  3. 03Add protection and switching devices

    Specify circuit breakers, fuses, disconnect switches, and their positions on each feeder.

  4. 04Add loads

    Name the final loads (motors, panels, equipment) connected to each bus — the AI places them at the bottom.

FAQ

Questions about single‑line diagram templates

What is a single-line diagram?

A simplified electrical diagram that represents a three-phase power system using a single line per circuit, with standardized symbols for transformers, breakers, buses, and loads. It is the standard reference for power system design and protection coordination.

What is the difference between an SLD and a circuit diagram?

An SLD represents a power distribution system at the system level — buses, feeders, transformers, and protection devices. A circuit diagram shows the detailed electrical connections of electronic components. SLDs are used by electrical engineers; circuit diagrams by electronics engineers.

What symbols are used in single-line diagrams?

IEEE/IEC standard symbols: double lines for transformers, rectangles for circuit breakers, X in a circle for disconnects, horizontal lines for buses, and waveforms for generators. ChatDiagram uses these standard symbols.